RD-SPEC-X26C-001 Rev: F October 2, 2006 Page: 1 of 1

TASER International reserves the right to change this specification without notice.

Model Model No. Color Magazine Type Grip color/style Holster

TASER® X26C 26010 Yellow DPM Metal Soft Carry

TASER® X26C 26009 Black DPM Black Soft Carry

TASER® X26C 26008 Clear DPM Black Soft Carry

Wave form: Complex shaped pulse

Pulse rate: 17 PPS for 2 seconds, 10 PPS thereafter for up to 30

seconds total

Pulse duration: 100 microseconds

The trigger activates a 10-second cycle. Second and third pull

increments the cycle 10 seconds each up to 30 seconds total.

Peak open circuit arcing voltage: 50,000 V

Peak loaded voltage: 1,200 V

Current: 1.9 mA average @ 17 PPS

Energy per pulse:

Nominal at main capacitors: 0.36 joules

Delivered into load: 0.07 joules

Power rating @ 17 PPS:

Nominal at main capacitors: 6 watts

Delivered into load: 1.2 watts

3. Temperature Range: -4 °F [-20°C] to 122 °F [50 °C]

4. Relative humidity: 15% to 80%

5. Housing: High impact polymer

6. Patent: U.S. D508,277 D504,489 and other patents pending

1. Integrated ultra-bright LED’s (low intensity

illumination).

2. Integrated 650 nm laser (used for target

acquisition).

3. Capable of drive stun with or without

TASER Cartridge installed.

4. Electrical charge can penetrate up to 2”

[5 cm] of clothing.

5. Central Information Display (CID) 2 digit

LED displays remaining DPM energy

percentage, burst time, warranty

expiration, unit temperature, illumination

status and current time and date.

6. Ambidextrous safety levers with Safe “S”

and Fire “F” denotation.

7. Warranty: 1-year standard, with extended

8. Video/Audio Recorder capable with

Length (L) Height (H) Width (W) Weight Length (L2)

6.00” [15.24 cm] 3.20” [8.13 cm] 1.300 [3.30 cm] 7.20 oz [204.12 g] 7.250” [18.52 cm]

1. Dimensions are in English [metric].

2. For additional cartridges contact TASER International sales representative.

3. TASER Cartridges available only in 15’ [4.57 m] range. Use of cartridges not authorized by TASER International

will void the product warranty.

4. Product specification may change without notice; actual product may vary from picture.

5. Additional terms and conditions may apply (for additional information contact a TASER International sales

6. Material Safety Data Sheets (MSDS) concerning lithium batteries available upon request.

7. Output specifications may vary dependant upon temperature, battery charge and load characteristics.

8. Additional models available. Please contact a TASER International sales representative for more information.

9. TASER is a registered trademark of TASER International, Inc. All rights reserved.